I have an ever-growing of earrings as they are probably my most favourite item of jewellery. Storage was becoming a bit of an issue until…
ta-da! - a fabulous wooden earrings stand for Christmas. Not only can I fit all my earrings on the stand but there is room for expansion! Thank you Mum!
I have just finished making this set of Christmas jewellery for myself to wear over the festive period. The pattern is from the latest Bead and Button magazine on p.48 and is called ‘Crystal Showers’. I made the earrings by completing just one unit of the design before attaching them to the ear hooks. The technique is right angle weave and is quite easy once you get the hang of the pattern.
You can probably see from the picture that the crystals I used are rather uneven. These are some I am using up as they were to be stock for my shop but I do not consider them good enough quality to sell.
I chose red and gold as my colour scheme as I think these are especially Christmassy colours and will add a bit of glitter to my outfit.
It is unlikely that I will get another opportunity to post here before Christmas so I hope you all have a fabulous holiday and a joyful new year.
In my last post I talked about the beaded snowflakes design in Dorothy Wood’s book ‘Simply Sparkling Christmas Beading’. My challenge was to find a way to create the wire frame for making beaded snowflakes using cold connections. Here is a tutorial for my beaded snowflake wirework frame which I have tested out with the following result:
To create the basic beaded snowflake wirework frame you need to cut three identical pieces of wire (I used 0.8 mm). The length is up to you as it will determine the final size of your beaded snowflake. Line up the wires next to each other and using a finer length of of wire (i used 0.6 mm) create a wirewrap around the wires at the midway point - see fig. 1.
fig. 1
You are almost done already! Once the wirewrap is secure you can then fold the arms out like so:
fig. 2
You are now ready to apply your chosen beads to each of the snowflake arms. Secure the beads by using your round nose pliers to create a small loop at the end of each wire - see fig. 3.
fig. 3
photo of my beaded snowflake at this stage
Don’t worry if your beaded snowflake is a little wobbly. You are about to add the embellishments with fine wire and this will hold it all together. For my beaded snowflake I created bead picks as explained in Dorothy’s book (pp. 14 - 17) but you could use more crystals, beads, seed beads, ribbons, buttons to suit your own tastes. I can’t explain here how to create the bead picks because I wish to respect Dorothy’s copyright. If you want to replicate these delicate beaded fronds please see her book. However all other forms of decoration can be attached using fine wire (0.2 or 0.3 mm) by twisting and weaving around the centre of the beaded snowflake. I found it useful to incorporate some beaded loops at the centre as these hide the wire you have used to bind the decoration. Add a hanging loop by attaching a thread on any one of the loops at the end of the beaded snowflake’s arms.
fig. 4
If you have a go at creating a beaded snowflake using my wirework frame tutorial do feel free to send me a picture and I will add it to this post. It would be nice to have a whole page of Christmassy beaded snowflakes!
Copyright 2007 http://www.allaboutjewellerymaking.info
Not to be reproduced on any other website, in printed format or on a portable media device. May be printed for personal use but must not be used for commercial purposes.
